favorite
favorite
hide
unhide
flag

Posted

print

Specialized Stumpjumper frame - $100 (barnstable)

Specialized Stumpjumper frame 1 thumbnailSpecialized Stumpjumper frame 2 thumbnailSpecialized Stumpjumper frame 3 thumbnailSpecialized Stumpjumper frame 4 thumbnailSpecialized Stumpjumper frame 5 thumbnailSpecialized Stumpjumper frame 6 thumbnailSpecialized Stumpjumper frame 7 thumbnail
part type: frame only
condition: fair
make / manufacturer: Specialized
model name / number: Stumpjumper
size / dimensions: 19"
Specialized Stumpjumper frame from the late 1990s (I think 1998). 19" center to center seat tube measurement fits riders 5'9" to 6' depending on inseam. Designed for 26" (ISO 559) wheels. 135mm quick release rear spacing. 1 1/8" straight headtube. One of the nice "handmade in the USA" ones. Comes with canti posts, Ritchey seatpost, seat tube collar, water bottle bolts, and derailluer hanger. Seatpost is 30.9mm so you could get fancy and put a modern dropper post on it. None of the hardware is seized, I removed everything and greased it properly before re-installing. Derailluer hanger may be a slight bit bent, I can't tell because I never built it up. It uses Wheels Manufacturing derailluer hanger # 13, which are still available. If you want to put a rigid fork on it, you should use a suspension-corrected one designed around an 80mm travel fork. Kinda dirty, will require some Goof Off and scrubbing to get shiny again. Has a good amount of superficial scratching. Bottom bracket threading looks good. There is some evidence of tire rub on the inside of the non-drive side chainstay. There is significant scratching from "chain suck" on the outside of the drive side chainstay. See pictures. Can deliver within reasonable distance.

post id: 7747306429

posted:

updated:

best of [?]

loading
reading
writing
saving
searching